Tube fittings
Instrumentation tube fittings
Instrumentation tube fittings for impulse, sample and control lines: BSP and NPT adapters, unions and connectors in SS 316 and special alloys.

Product range
Instrumentation tube fittings: products
20 items. Open any product for its specifications, or request a quote for several at once.
Reducing BSP Adapter (RI)
BSP Threaded Ferrule Fittings
Straight Union
Stainless Steel Hydraulic Fitting
Compression Tube Fittings
Stainless Steel Ferrule Fitting
SS Tube Fittings
Ferrule Tube Fitting
Compression Tube Fitting
SS Ferrule Fittings
DIN 2353 Hydraulic Tube Fittings
Double Ferrule Instrument FittingsApplications
Where they are used
- Instrument impulse lines
- Analyser and sample systems
- Hydraulic and pneumatic control lines
- Chemical injection skids
- Gas distribution panels
- Test benches and rigs
Get an accurate quote faster
Before you request a quote
Include these details and we can quote without back-and-forth:
- Tube OD (inch or mm) and wall thickness
- Fitting type: connector, union, elbow, tee, bulkhead, plug, cap
- End connection and gender: NPT, BSPT, BSPP or metric thread
- Material: SS 316, SS 304, brass, Monel, duplex or other
- Working pressure, temperature and the medium
- Quantity and delivery location
How quoting works
- 1Send the requirementProduct, size, material, ends, pressure and quantity, with drawings or a list if you have them.
- 2We review itWe check the details and come back if anything is unclear or missing.
- 3You get a quotationItemised prices, delivery time and the documents that will be supplied.
- 4Order and deliveryWe supply to your site anywhere in India.
FAQ
Frequently asked questions
What are instrumentation tube fittings?
They connect small-bore tubing to instruments, valves and process taps. They are compression fittings, usually double ferrule, made for leak-tight service on impulse, sample and control lines.
Which material should I choose for instrument fittings?
SS 316 covers most plants. Use Monel, duplex, super duplex or 6Mo for seawater and chlorides, Hastelloy or Alloy 20 for strong acids, and brass for water and air at low pressure.
What is the difference between single ferrule and double ferrule fittings?
Double ferrule (two-ferrule) fittings split the work between a front ferrule, which seals against the fitting body and the tube, and a back ferrule, which drives the front ferrule and grips the tube. That suits instrument lines with vibration and temperature cycling. Single ferrule (bite-type) fittings use one ferrule that bites into the tube; they are the usual choice for hydraulic lines built to DIN 2353 / ISO 8434-1.
Can I mix nuts, ferrules and bodies from different manufacturers?
We advise against it. Nuts, ferrules and bodies are designed and tested as a set, so mixing parts makes the pressure rating and leak-tightness unpredictable. Order complete fittings, and buy spare nuts and ferrules from the same series.
What tube should I use with stainless steel tube fittings?
Use fully annealed seamless or welded-and-drawn stainless steel tube, for example to ASTM A269 or A213, that is softer than the fitting and within the OD tolerance the fitting is made for. Choose the wall thickness for the working pressure. Send us the tube specification and we will confirm the match.
Which thread do I need: NPT, BSPT or BSPP?
NPT (ASME B1.20.1) and BSPT (ISO 7-1) are both tapered and seal on the thread with a sealant, but their thread forms differ (60° and 55°). BSPP (ISO 228-1) is parallel and seals with a bonded washer or O-ring. They are not interchangeable, so check the port you are connecting to.
Next step
Tell us what you need
Part number, size, material or a full list: send it and get a clear quotation.








