Hydraulics
Hydraulic SAE flanges (Code 61 and 62)
Four-bolt SAE Code 61 and Code 62 hydraulic flanges, split flanges and flange ball valves for pumps, valves and high-pressure lines.

Product range
Hydraulic SAE flanges (Code 61 and 62): products
4 items. Open any product for its specifications, or request a quote for several at once.
Applications
Where they are used
- Hydraulic power packs
- Presses and machine tools
- Mobile and earth-moving equipment
- Steel mill and foundry hydraulics
- Lubrication systems
- Hydraulic test benches
Get an accurate quote faster
Before you request a quote
Include these details and we can quote without back-and-forth:
- System working pressure
- Tube OD and series (L or S for DIN 2353 fittings)
- Threads: BSPP, metric, UNF/JIC or SAE O-ring boss
- Seal type: cutting ring, O-ring face or 37° flare
- Material and plating
- Flange size and SAE code (61 or 62)
- Quantity
How quoting works
- 1Send the requirementProduct, size, material, ends, pressure and quantity, with drawings or a list if you have them.
- 2We review itWe check the details and come back if anything is unclear or missing.
- 3You get a quotationItemised prices, delivery time and the documents that will be supplied.
- 4Order and deliveryWe supply to your site anywhere in India.
FAQ
Frequently asked questions
Which standard covers SAE hydraulic flanges?
SAE J518 and ISO 6162-1 (Code 61) and ISO 6162-2 (Code 62) set the flange and port dimensions.
What seal is used with SAE flanges?
An O-ring sits in a groove in the flange face and seals against the port face. The O-ring material is chosen to suit the oil and the temperature.
What do L and S series mean for DIN 2353 fittings?
For the same tube OD, light (L) series and heavy (S) series fittings have different body sizes, threads and pressure ratings. The S series is built for higher pressure. The series of the fitting, the nut and the cutting ring must all match.
Are JIC, 24° cone and O-ring face seal fittings interchangeable?
No. JIC fittings (SAE J514) seal metal-to-metal on a 37° flare. 24° cone fittings (DIN 2353 / ISO 8434-1) seal with a cutting ring that bites into the tube. O-ring face seal fittings (SAE J1453) seal with an O-ring on a flat face. Each needs its matching counterpart.
What is the difference between SAE Code 61 and Code 62 flanges?
Code 61 is the standard-pressure series and Code 62 the high-pressure series of four-bolt split flanges (SAE J518 / ISO 6162). For the same nominal size, Code 62 flanges are thicker and use a different bolt pattern, so the two cannot be mixed.
Why are tube clamps important in hydraulic lines?
Clamps hold tubes in place and damp vibration and noise. Without them, pulsation and vibration cause fatigue at fittings and bends. Clamp spacing depends on the tube size and the duty.
Next step
Tell us what you need
Part number, size, material or a full list: send it and get a clear quotation.



