Industries
Fittings for marine, offshore and desalination
Copper-nickel, super duplex, 254 SMO, Monel and titanium fittings, flanges and tube fittings for ships, offshore platforms and desalination plants.
Industry
Overview
Seawater is one of the most aggressive media for metals. Chlorides cause pitting and crevice corrosion, biofouling blocks lines, and high velocities erode soft alloys.
For seawater, firewater and desalination lines we supply copper-nickel 90/10 and 70/30 fittings and flanges, super duplex and 254 SMO for high-chloride service, Monel and titanium for pumps, heat exchangers and instrumentation, and marine-grade tube fittings.
Typical challenges
- Chloride pitting and crevice corrosion
- Biofouling
- Erosion at high flow velocity
- Galvanic corrosion between metals
- Long service life far from shore
Materials often specified
- CuNi 90/10 and 70/30
- Super duplex
- 254 SMO (6Mo)
- Monel 400
- Titanium Gr 2
- Inconel 625
Products
What we supply for this industry
Cupro nickelCuNi 90/10 tube fittings, copper nickel tube fittings, round bars and Allen bolts for…
Super duplexSuper duplex (UNS S32750 / S32760) tube fittings, female connectors and buttweld…
254 SMO254 SMO / 6Mo (UNS S31254) bulkhead unions, equal unions, hydraulic fittings and…Monel pipe fittingsMonel 400 (UNS N04400) buttweld fittings, forged fittings and flanges to ASTM B366…
TitaniumTitanium Grade 2 and Grade 5 pipe fittings, flanges, wire and sheets for seawater,…
Double ferrule fittingsTwo-ferrule compression tube fittings in SS 316, SS 304, brass and special alloys for…FAQ
Frequently asked questions
Which material is best for seawater piping?
CuNi 90/10 is the long-established choice for shipboard seawater systems. Super duplex and 6Mo are used where higher strength or temperature is needed, and titanium for heat exchangers.
Can stainless 316 be used in seawater?
Not reliably. 316 can pit and suffer crevice corrosion in seawater, especially when warm or stagnant. Use super duplex, 6Mo, CuNi or titanium.
How do I avoid galvanic corrosion when mixing metals?
Avoid connecting metals far apart in the galvanic series in seawater, or isolate them with insulating gasket kits. Ask us when combining copper alloys with stainless or titanium.
Next step
Tell us what you need
Part number, size, material or a full list: send it and get a clear quotation.
