Skip to content

Tube fittings, valves, pipe fittings and flanges · Mogappair, Chennai

Request a quote

Help

Frequently asked questions

Answers on quotations, materials, tube fittings, valves, hydraulic fittings, pipe fittings and flanges from EKA Pipe Fittings, Chennai.

FAQ

Quotes and ordering

How do I get a quotation?

Use the Request a quote form, email contact@ekasynergy.com or call +91 94448 77783. Include the product, size, material, end connections, working pressure and temperature, and quantity. Drawings and lists can be attached to the form.

Where are you located, and where do you supply?

EKA Pipe Fittings is based in Mogappair, Chennai, and supplies customers across India.

Do you accept small quantities?

Yes. Send the quantity you need. Spares and single items are quoted as well as project quantities.

Can you supply fittings to a drawing or a special requirement?

Yes. Special sizes, combined end connections and custom valves can be made to a drawing or a sample. Share the drawing and the working conditions.

FAQ

Tube fittings

What is the difference between single ferrule and double ferrule fittings?

Double ferrule (two-ferrule) fittings split the work between a front ferrule, which seals against the fitting body and the tube, and a back ferrule, which drives the front ferrule and grips the tube. That suits instrument lines with vibration and temperature cycling. Single ferrule (bite-type) fittings use one ferrule that bites into the tube; they are the usual choice for hydraulic lines built to DIN 2353 / ISO 8434-1.

Can I mix nuts, ferrules and bodies from different manufacturers?

We advise against it. Nuts, ferrules and bodies are designed and tested as a set, so mixing parts makes the pressure rating and leak-tightness unpredictable. Order complete fittings, and buy spare nuts and ferrules from the same series.

What tube should I use with stainless steel tube fittings?

Use fully annealed seamless or welded-and-drawn stainless steel tube, for example to ASTM A269 or A213, that is softer than the fitting and within the OD tolerance the fitting is made for. Choose the wall thickness for the working pressure. Send us the tube specification and we will confirm the match.

Which thread do I need: NPT, BSPT or BSPP?

NPT (ASME B1.20.1) and BSPT (ISO 7-1) are both tapered and seal on the thread with a sealant, but their thread forms differ (60° and 55°). BSPP (ISO 228-1) is parallel and seals with a bonded washer or O-ring. They are not interchangeable, so check the port you are connecting to.

What pressure rating do the fittings have?

The rating depends on the tube OD and wall thickness, the material and the temperature, and the tube is usually the limiting part. Tell us the tube size and the working conditions and we will quote fittings rated for the duty.

FAQ

Valves & manifolds

Should I choose a needle valve or a ball valve?

A needle valve uses a tapered stem for gradual flow control and positive shut-off, so it suits gauge isolation, metering and sampling. A ball valve is a quarter-turn on/off valve with low pressure drop, so it suits quick isolation. Many instrument lines use both.

What is the difference between 2-, 3- and 5-valve manifolds?

A 2-valve manifold isolates and vents a pressure gauge or transmitter. A 3-valve manifold has two isolation valves and an equalising valve for differential-pressure transmitters. A 5-valve manifold adds two vent or test valves to the 3-valve layout, which helps with DP flow and level measurement.

Can valves be supplied with tube fitting ends?

Yes. Instrument valves can be made with male or female NPT or BSP threads, compression tube ends, or a mix of the two. State the connection at each port when you enquire.

Which seat material should I choose?

Soft seats such as PTFE, reinforced PTFE or PEEK give tight shut-off at moderate temperatures. Metal seats are used when the temperature or the medium rules out polymers. Tell us the temperature and the medium and we will recommend a seat.

Can you provide test certificates with the valves?

State the testing and documents you need in your enquiry, such as shell and seat tests or material test certificates, and we will confirm what is supplied in the quotation.

FAQ

Hydraulics

What do L and S series mean for DIN 2353 fittings?

For the same tube OD, light (L) series and heavy (S) series fittings have different body sizes, threads and pressure ratings. The S series is built for higher pressure. The series of the fitting, the nut and the cutting ring must all match.

Are JIC, 24° cone and O-ring face seal fittings interchangeable?

No. JIC fittings (SAE J514) seal metal-to-metal on a 37° flare. 24° cone fittings (DIN 2353 / ISO 8434-1) seal with a cutting ring that bites into the tube. O-ring face seal fittings (SAE J1453) seal with an O-ring on a flat face. Each needs its matching counterpart.

What is the difference between SAE Code 61 and Code 62 flanges?

Code 61 is the standard-pressure series and Code 62 the high-pressure series of four-bolt split flanges (SAE J518 / ISO 6162). For the same nominal size, Code 62 flanges are thicker and use a different bolt pattern, so the two cannot be mixed.

Why are tube clamps important in hydraulic lines?

Clamps hold tubes in place and damp vibration and noise. Without them, pulsation and vibration cause fatigue at fittings and bends. Clamp spacing depends on the tube size and the duty.

Which quick release coupling should I choose?

Ball-locking couplings are the general-purpose choice. Flat-face couplings spill less oil and let in less air when connecting. Screw-to-connect couplings are used for high pressure and heavy pulsation. Match the coupling to the pressure, the flow and how often it is connected.

FAQ

Buttweld fittings

Which standards cover buttweld pipe fittings?

ASME B16.9 sets dimensions for factory-made wrought buttwelding fittings, and MSS SP-43 covers light-wall stainless fittings in schedules 5S and 10S. The material is ordered to a specification such as ASTM A403 (stainless steel), A234 (carbon and alloy steel), A420 (low-temperature carbon steel), A815 (duplex) or B366 (nickel alloys).

What is the difference between long radius and short radius elbows?

A long radius (LR) elbow has a centre-line radius of 1.5 times the nominal pipe size. A short radius (SR) elbow has a radius equal to the nominal size. LR elbows give lower pressure drop and are the default; SR elbows are used where space is tight.

What do WP-S, WP-W and WP-WX mean on stainless fittings?

They are ASTM A403 classes. WP-S fittings are made from seamless product, WP-W fittings are welded, WP-WX fittings have all welds radiographed and WP-WU fittings have all welds ultrasonically tested. The class should appear on your order and on the fitting marking.

Should I use a concentric or an eccentric reducer?

Concentric reducers keep the centre line, so they suit vertical lines. Eccentric reducers have one flat side; on pump suction they are fitted flat side up so air pockets cannot form, and on pipe racks flat side down to keep the bottom of the pipe level.

Why must the fitting schedule match the pipe?

The schedule sets the wall thickness at the weld bevel. A matching schedule gives an even weld and the full pressure rating of the line. Where the wall thicknesses differ, the fitting needs a transition taper.

FAQ

Forged fittings

Which standard covers forged socket weld and threaded fittings?

ASME B16.11 covers forged socket weld and threaded fittings from NPS 1/8 to 4. Branch outlets are made to MSS SP-97, swage nipples to MSS SP-95 and unions to MSS SP-83. The material is ordered to ASTM A182 (stainless and alloy steel), A105 (carbon steel), A350 (low-temperature steel) or B564 (nickel alloys).

How do I match the fitting class to the pipe schedule?

Under ASME B16.11, socket weld Class 3000 suits Schedule 80 pipe, Class 6000 suits Schedule 160 and Class 9000 suits XXS. For threaded fittings, Class 2000 suits Schedule 80, Class 3000 suits Schedule 160 and Class 6000 suits XXS.

Why is a gap left in a socket weld joint?

The pipe is pulled back about 1.6 mm (1/16") from the bottom of the socket before welding. The gap lets the joint expand as it cools, which reduces the risk of the fillet weld cracking.

Socket weld or threaded: which should I use?

Socket weld joints are leak-tight and strong, so they are preferred for process lines, high pressure and hazardous media. Threaded joints need no welding and are easy to take apart, which suits utility lines and places where welding is not allowed.

FAQ

Flanges

Which flange type should I choose?

Weld neck flanges suit high pressure, high temperature and cyclic loads. Slip-on flanges are easier to align and suit lower pressures. Socket weld flanges suit small-bore high-pressure lines, threaded flanges suit lines that cannot be welded, lap joint flanges with stub ends suit lines that are taken apart often, and blind flanges close a line or a nozzle.

What is the difference between RF, FF and RTJ facings?

Raised face (RF) flanges concentrate the gasket load on a raised ring and are the most common. Flat face (FF) flanges are used against cast iron or other brittle flanges. Ring type joint (RTJ) flanges seal with a metal ring in a groove and are used at high pressure and temperature.

Are Class 150 and PN16 flanges interchangeable?

No. ASME B16.5 classes and EN 1092-1 PN ratings use different bolt circles, bolt sizes and pressure-temperature tables, so a Class flange will not bolt to a PN flange of the same size. Tell us the standard of the mating flange.

What sizes and classes are covered by ASME B16.5?

ASME B16.5 covers NPS 1/2 to 24 in Classes 150, 300, 400, 600, 900, 1500 and 2500. Larger flanges, NPS 26 to 60, are made to ASME B16.47 Series A or B.

FAQ

Pipes, tubes & hoses

What is the difference between pipe and tube sizes?

Pipe is ordered by nominal pipe size (NPS) and schedule, which sets the wall thickness, so the actual OD is fixed for each NPS. Tube is ordered by its actual outside diameter and wall thickness. Instrument and heat-exchanger lines normally use tube.

Seamless or welded: which do I need?

Seamless pipe has no weld seam and is preferred for high pressure and critical service. Welded pipe is economical, available in larger sizes and suits many process and utility lines. The project specification or code normally decides.

Which ASTM specifications apply to stainless steel pipe and tube?

Common ones are ASTM A312 for seamless and welded pipe, A269 for general-service tubing, A213 for seamless boiler, superheater and heat-exchanger tubes, A249 for welded heat-exchanger tubes, A270 for sanitary tubing and A790 for duplex pipe.

FAQ

Materials

Do you supply material test certificates?

Tell us the certificate type you need, for example EN 10204 3.1, and any extra tests such as PMI or intergranular corrosion testing. We confirm the documents with the quotation.

Can you supply fittings and flanges in the same grade?

Yes. Most enquiries combine pipe, buttweld fittings, forged fittings and flanges in one grade. Send the complete list and we will quote it as one package.

FAQ

Fasteners & seals

Which grades are used for stud bolts and nuts on flanges?

ASTM A193 B7 studs with A194 2H nuts are common for carbon and alloy steel flanges. A193 B8 and B8M studs with A194 8 and 8M nuts are used with stainless steel. ASTM A320 L7 is used for low temperatures.

Which O-ring material should I use?

NBR suits mineral oils and water at moderate temperatures. FKM handles higher temperatures and many fuels and chemicals. EPDM suits water, steam and brake fluid but not mineral oil. PTFE is used for aggressive chemicals. Tell us the medium and the temperature.

Next step

Did not find your answer?

Send your question with the product and the duty, and we will reply.