Skip to content

Tube fittings, valves, pipe fittings and flanges · Mogappair, Chennai

Request a quote

Tube fittings

High pressure fittings and adaptors

High-pressure adaptors, unions and tube fittings for 6,000 to 20,000 psi service, plus custom high-pressure fittings made to your drawing.

High pressure fittings and adaptors

Product range

High pressure fittings and adaptors: products

4 items. Open any product for its specifications, or request a quote for several at once.

View in catalogue

Applications

Where they are used

  • Instrument impulse lines
  • Analyser and sample systems
  • Hydraulic and pneumatic control lines
  • Chemical injection skids
  • Gas distribution panels
  • Test benches and rigs

Get an accurate quote faster

Before you request a quote

Include these details and we can quote without back-and-forth:

  • Tube OD (inch or mm) and wall thickness
  • Fitting type: connector, union, elbow, tee, bulkhead, plug, cap
  • End connection and gender: NPT, BSPT, BSPP or metric thread
  • Material: SS 316, SS 304, brass, Monel, duplex or other
  • Working pressure, temperature and the medium
  • Quantity and delivery location

How quoting works

  1. 1Send the requirementProduct, size, material, ends, pressure and quantity, with drawings or a list if you have them.
  2. 2We review itWe check the details and come back if anything is unclear or missing.
  3. 3You get a quotationItemised prices, delivery time and the documents that will be supplied.
  4. 4Order and deliveryWe supply to your site anywhere in India.

FAQ

Frequently asked questions

What pressure is "high pressure" for fittings?

Standard instrument fittings commonly run to about 6,000 psi depending on tube size. Medium and high-pressure fittings for 10,000 to 20,000 psi use heavier bodies and coned-and-threaded or similar connections.

Can you make high-pressure adaptors to a drawing?

Yes. Send the drawing, the material, the working pressure and the quantity.

What is the difference between single ferrule and double ferrule fittings?

Double ferrule (two-ferrule) fittings split the work between a front ferrule, which seals against the fitting body and the tube, and a back ferrule, which drives the front ferrule and grips the tube. That suits instrument lines with vibration and temperature cycling. Single ferrule (bite-type) fittings use one ferrule that bites into the tube; they are the usual choice for hydraulic lines built to DIN 2353 / ISO 8434-1.

Can I mix nuts, ferrules and bodies from different manufacturers?

We advise against it. Nuts, ferrules and bodies are designed and tested as a set, so mixing parts makes the pressure rating and leak-tightness unpredictable. Order complete fittings, and buy spare nuts and ferrules from the same series.

What tube should I use with stainless steel tube fittings?

Use fully annealed seamless or welded-and-drawn stainless steel tube, for example to ASTM A269 or A213, that is softer than the fitting and within the OD tolerance the fitting is made for. Choose the wall thickness for the working pressure. Send us the tube specification and we will confirm the match.

Which thread do I need: NPT, BSPT or BSPP?

NPT (ASME B1.20.1) and BSPT (ISO 7-1) are both tapered and seal on the thread with a sealant, but their thread forms differ (60° and 55°). BSPP (ISO 228-1) is parallel and seals with a bonded washer or O-ring. They are not interchangeable, so check the port you are connecting to.

Next step

Tell us what you need

Part number, size, material or a full list: send it and get a clear quotation.