Industries
Tube fittings, valves and fittings for oil and gas
Instrumentation tube fittings, needle valves, manifolds, duplex and nickel alloy pipe fittings and flanges for upstream, midstream and refinery service.
Industry
Overview
Onshore and offshore production facilities rely on thousands of small-bore connections for pressure, flow and level instruments, chemical injection and sampling. Leaks at these joints are a safety and environmental risk, so the fittings must hold under vibration, temperature swings and corrosive atmospheres.
Typical packages combine SS 316 or duplex instrument tube fittings, needle and ball valves, 2-, 3- and 5-valve manifolds and double block and bleed valves, with pipe fittings and flanges in carbon steel, low-temperature carbon steel, duplex and super duplex.
Typical challenges
- Chloride-rich and humid atmospheres on coastal and offshore sites
- Vibration from pumps and compressors
- Sour service and H₂S
- High-pressure gas and hydraulic lines
- Strict documentation and traceability
Materials often specified
- SS 316 / 316L
- Duplex 2205
- Super duplex
- Monel 400
- Inconel 625
- Carbon steel A105 / A234 WPB
- LTCS A350 LF2 / A420 WPL6
Products
What we supply for this industry
Double ferrule fittingsTwo-ferrule compression tube fittings in SS 316, SS 304, brass and special alloys for…
Manifold valves2-, 3- and 5-way manifold valves and block and bleed valves for pressure gauges and…
Needle valvesMini, forged and instrument needle valves for gauge isolation, sampling and flow…Duplex 2205Duplex 2205 (UNS S31803 / S32205) pipe, buttweld and forged fittings and flanges to…
Super duplexSuper duplex (UNS S32750 / S32760) tube fittings, female connectors and buttweld…
Weld neck flangesForged weld neck flanges to ASME B16.5, B16.47 and EN 1092-1, RF and RTJ, in…
Carbon steel fittingsCarbon steel buttweld fittings to ASTM A234 WPB and A420 WPL6, forged fittings and…
Check valvesPoppet, piston and dual-plate check valves that stop reverse flow, with tube,…FAQ
Frequently asked questions
Which materials are used for offshore instrument fittings?
SS 316 is common where conditions are mild. Duplex, super duplex and 6Mo are chosen for exposed offshore locations because they resist chloride pitting and stress corrosion cracking far better.
What is a double block and bleed valve used for?
It isolates an instrument or a line with two valves in series and vents the space between them, proving the isolation before maintenance.
Can you supply NACE-compliant material?
Tell us if the service is sour and which standard applies, for example NACE MR0175 / ISO 15156, and we will confirm the materials and documents in the quotation.
Next step
Tell us what you need
Part number, size, material or a full list: send it and get a clear quotation.
