Skip to content

Tube fittings, valves, pipe fittings and flanges · Mogappair, Chennai

Request a quote

Valves & manifolds

Industrial and instrumentation valves

Needle, ball, gate, globe, check and toggle valves for instrument, hydraulic and process lines, including ultra-high-pressure needle valves.

Industrial and instrumentation valves

Product range

Industrial and instrumentation valves: products

5 items. Open any product for its specifications, or request a quote for several at once.

View in catalogue

Applications

Where they are used

  • Gauge and transmitter isolation
  • Sampling, drain and vent points
  • Hydraulic power units
  • Test rigs and calibration benches
  • Chemical injection
  • Steam and condensate lines

Get an accurate quote faster

Before you request a quote

Include these details and we can quote without back-and-forth:

  • Valve type: needle, ball, check, manifold, relief or custom
  • Size and end connections at each port
  • Body and seat material
  • Pressure class and maximum temperature
  • Medium (gas, oil, water, steam, chemical)
  • Operation: handle, T-bar, lockable, panel mounting
  • Quantity and test documents needed

How quoting works

  1. 1Send the requirementProduct, size, material, ends, pressure and quantity, with drawings or a list if you have them.
  2. 2We review itWe check the details and come back if anything is unclear or missing.
  3. 3You get a quotationItemised prices, delivery time and the documents that will be supplied.
  4. 4Order and deliveryWe supply to your site anywhere in India.

FAQ

Frequently asked questions

Which valve types do you supply?

Needle valves, ball valves, check valves, manifold valves, gate and globe valves, toggle valves and pressure relief valves, in instrumentation and process sizes.

What is a toggle valve?

A quick-acting on/off valve operated by a lever. It suits instrument air, sampling and purge lines where fast operation matters.

Should I choose a needle valve or a ball valve?

A needle valve uses a tapered stem for gradual flow control and positive shut-off, so it suits gauge isolation, metering and sampling. A ball valve is a quarter-turn on/off valve with low pressure drop, so it suits quick isolation. Many instrument lines use both.

What is the difference between 2-, 3- and 5-valve manifolds?

A 2-valve manifold isolates and vents a pressure gauge or transmitter. A 3-valve manifold has two isolation valves and an equalising valve for differential-pressure transmitters. A 5-valve manifold adds two vent or test valves to the 3-valve layout, which helps with DP flow and level measurement.

Can valves be supplied with tube fitting ends?

Yes. Instrument valves can be made with male or female NPT or BSP threads, compression tube ends, or a mix of the two. State the connection at each port when you enquire.

Which seat material should I choose?

Soft seats such as PTFE, reinforced PTFE or PEEK give tight shut-off at moderate temperatures. Metal seats are used when the temperature or the medium rules out polymers. Tell us the temperature and the medium and we will recommend a seat.

Next step

Tell us what you need

Part number, size, material or a full list: send it and get a clear quotation.