Skip to content

Tube fittings, valves, pipe fittings and flanges · Mogappair, Chennai

Request a quote

Industries

Fittings for marine, offshore and desalination

Copper-nickel, super duplex, 254 SMO, Monel and titanium fittings, flanges and tube fittings for ships, offshore platforms and desalination plants.

Industry

Overview

Seawater is one of the most aggressive media for metals. Chlorides cause pitting and crevice corrosion, biofouling blocks lines, and high velocities erode soft alloys.

For seawater, firewater and desalination lines we supply copper-nickel 90/10 and 70/30 fittings and flanges, super duplex and 254 SMO for high-chloride service, Monel and titanium for pumps, heat exchangers and instrumentation, and marine-grade tube fittings.

Typical challenges

  • Chloride pitting and crevice corrosion
  • Biofouling
  • Erosion at high flow velocity
  • Galvanic corrosion between metals
  • Long service life far from shore

Materials often specified

  • CuNi 90/10 and 70/30
  • Super duplex
  • 254 SMO (6Mo)
  • Monel 400
  • Titanium Gr 2
  • Inconel 625

FAQ

Frequently asked questions

Which material is best for seawater piping?

CuNi 90/10 is the long-established choice for shipboard seawater systems. Super duplex and 6Mo are used where higher strength or temperature is needed, and titanium for heat exchangers.

Can stainless 316 be used in seawater?

Not reliably. 316 can pit and suffer crevice corrosion in seawater, especially when warm or stagnant. Use super duplex, 6Mo, CuNi or titanium.

How do I avoid galvanic corrosion when mixing metals?

Avoid connecting metals far apart in the galvanic series in seawater, or isolate them with insulating gasket kits. Ask us when combining copper alloys with stainless or titanium.

Next step

Tell us what you need

Part number, size, material or a full list: send it and get a clear quotation.