Industries
Hydraulic fittings for machinery and OEMs
DIN 2353 and JIC fittings, SAE flanges, tube clamps, quick release couplings, test points and gauges for hydraulic power units, presses and machine builders.
Industry
Overview
Hydraulic power units, presses, machine tools, mobile equipment and steel mill hydraulics run at high pressure with pulsation and vibration. Fittings, flanges and clamps must hold under these loads without weeping or loosening.
We supply cutting ring fittings to DIN 2353 / ISO 8434-1 in L and S series, JIC 37° fittings, SAE Code 61 and 62 flanges, light and heavy series clamps, quick release couplings, test points, gauges and precision tubing for OEM builds and maintenance.
Typical challenges
- High pressure with pulsation
- Vibration and fatigue at fittings
- Mixed thread standards on imported equipment
- Fast maintenance and quick couplings
- Clean, leak-free assembly
Materials often specified
- Carbon steel (zinc-nickel or zinc plated)
- SS 316
- Brass for low pressure
- NBR and FKM seals
Products
What we supply for this industry
Hydraulic fittingsHydraulic tube and hose fittings to DIN 2353, JIS B2351 and 6,000 psi ratings, in…
Single ferrule fittingsSingle ferrule (bite-type) fittings to DIN 2353 / ISO 8434-1 for hydraulic and…
JIC fittingsJIC 37° flare fittings to SAE J514
Hydraulic SAE flangesFour-bolt SAE Code 61 and Code 62 hydraulic flanges, split flanges and flange ball…
SAE & square flangesWeld-on SAE hydraulic flanges, 90° flanges and JIS B2291 square flanges for hydraulic…
Tube clampsLight and heavy series tube clamps, double-hole clamps and carbon steel clamp…
Quick release couplingsHydraulic and pneumatic quick release couplings
Test pumps & gaugesDial and steel pressure gauges, gauge accessories and electromagnetic flow meters for…FAQ
Frequently asked questions
How do I identify an unknown hydraulic thread?
Measure the thread OD and pitch, and check whether it is parallel or tapered and how it seals (cone, O-ring or flare). Send photos and measurements and we will help identify it.
Which fittings for 400 bar systems?
Use S (heavy) series DIN 2353 fittings or SAE Code 62 flanges sized for the pressure, with tube of a suitable wall thickness.
Do you supply clamps and tubing with the fittings?
Yes. Clamps, precision tubing (DIN 2391 / EN 10305), test points and gauges can be quoted with the fittings.
Next step
Tell us what you need
Part number, size, material or a full list: send it and get a clear quotation.
