Buttweld fittings
Buttweld pipe fittings
ASME B16.9 elbows, tees, reducers, caps, crosses, bends and stub ends in stainless, carbon, alloy, duplex and nickel alloy steel, 1/2" to 48".
Range
Buttweld fitting types
SS pipe fittingsButtweld, socket weld and threaded stainless steel pipe fittings and flanges in…
SS buttweld fittingsStainless steel buttweld elbows, tees, reducers, crosses, caps and stub ends to ASME…
Pipe bendsStainless, carbon and alloy steel pipe bends from 1.5D to 10D radius, piggable bends…
Pipe elbowsLong and short radius buttweld elbows, 45°, 90° and 180°, in stainless, carbon,…
Pipe teesEqual and reducing buttweld tees, barred tees and forged tees in stainless, carbon,…
Pipe reducersConcentric and eccentric buttweld reducers to ASME B16.9 and forged swage nipples, in…
End capsButtweld pipe end caps to ASME B16.9 and forged socket weld and threaded caps, in…
Pipe crossesEqual and reducing pipe crosses in buttweld, socket weld and threaded forms, to ASME…
Stub endsShort and long pattern stub ends for lap joint flanges, to MSS SP-43 and ASME B16.9,…
IC fittingsStainless steel investment casting fittings
Fabricated & flanged pipesDouble-flanged spools, fabricated elbows, tees and reducers, and large-diameter…
Dairy fittingsHygienic SS 304 and SS 316L dairy fittings
Dish endsTorispherical, ellipsoidal, hemispherical and flat dished ends and cones in stainless…
Carbon steel fittingsCarbon steel buttweld fittings to ASTM A234 WPB and A420 WPL6, forged fittings and…
Alloy steel fittingsChrome-moly alloy steel fittings to ASTM A234 WP11, WP22, WP5, WP9 and WP91, forged…
Aluminium fittingsAluminium buttweld elbows, tees, reducers, tube bends and slip-on flanges in 6061,…Reference
Buttweld fittings: standards and materials
| Material | Specifications and grades |
|---|---|
| Stainless steel | ASTM A403 WP304/304L, WP316/316L, WP321, WP347, WP310S, WP317L, WP904L |
| Carbon steel | ASTM A234 WPB, WPC |
| Low-temperature carbon steel | ASTM A420 WPL6, WPL3 |
| Alloy steel | ASTM A234 WP11, WP22, WP5, WP9, WP91 |
| Duplex and super duplex | ASTM A815 WPS31803, WPS32205, WPS32750, WPS32760 |
| Nickel alloys | ASTM B366 Monel 400, Inconel 600/625, Alloy 20, Hastelloy C276 |
Specification
How to specify buttweld fittings
Give the fitting type, the nominal pipe size and schedule at each end, the material specification and grade, and whether the fitting is seamless or welded. For stainless steel, state the ASTM A403 class (WP-S, WP-W, WP-WX or WP-WU). Add the dimensional standard if it is not ASME B16.9, and the documents and tests you need, such as EN 10204 3.1 certificates, radiography or PMI.
FAQ
Frequently asked questions
Which standards cover buttweld pipe fittings?
ASME B16.9 sets dimensions for factory-made wrought buttwelding fittings, and MSS SP-43 covers light-wall stainless fittings in schedules 5S and 10S. The material is ordered to a specification such as ASTM A403 (stainless steel), A234 (carbon and alloy steel), A420 (low-temperature carbon steel), A815 (duplex) or B366 (nickel alloys).
What is the difference between long radius and short radius elbows?
A long radius (LR) elbow has a centre-line radius of 1.5 times the nominal pipe size. A short radius (SR) elbow has a radius equal to the nominal size. LR elbows give lower pressure drop and are the default; SR elbows are used where space is tight.
What do WP-S, WP-W and WP-WX mean on stainless fittings?
They are ASTM A403 classes. WP-S fittings are made from seamless product, WP-W fittings are welded, WP-WX fittings have all welds radiographed and WP-WU fittings have all welds ultrasonically tested. The class should appear on your order and on the fitting marking.
Should I use a concentric or an eccentric reducer?
Concentric reducers keep the centre line, so they suit vertical lines. Eccentric reducers have one flat side; on pump suction they are fitted flat side up so air pockets cannot form, and on pipe racks flat side down to keep the bottom of the pipe level.
Why must the fitting schedule match the pipe?
The schedule sets the wall thickness at the weld bevel. A matching schedule gives an even weld and the full pressure rating of the line. Where the wall thicknesses differ, the fitting needs a transition taper.
Next step
Tell us what you need
Part number, size, material or a full list: send it and get a clear quotation.
